Upgrade your smart home wireless network to a higher level, by taking advantage of the Orbi AX6000 system. With its extraordinary range, ensure that all of your devices stay online all the time at a constant speed.
The Orbi RBR850 AX6000 router provides an enhanced and concurrent internet streaming experience. The RBS850 satellite extends its network so that your devices can have WiFi connectivity even if you’re in the attic or basement.
The Orbi AX6000 WiFi system comes in three sets:
- RBK852 – One router & one satellite (2-Pack)
- RBK853 – One router & two satellites (3-Pack)
- RBK854 – One router & three satellites (4-Pack)
But with this Netgear Orbi AX6000 setup guide, you can set up all these packs in no time. So, let’s get this ball rolling…
Orbi AX6000 setup instructions
There are two methods to set up the Orbi AX6000 series system, which are as follows:
Setup using the web interface
Follow these steps to install the Orbi AX6000 system using the web interface:
First, unbox the pack and fetch every single item out of it. The Orbi AX6000 pack contains the following items:
- Power adapters
- Ethernet wire
Set the router
The second phase is to configure the router with the main modem. Follow these steps to achieve this objective:
- Switch off the old router and modem.
- Disconnect the modem from the old router, by removing the ethernet cable.
- Place your RBR850 router in place of your old router and connect it to the modem, using the Ethernet wire.
- Switch on the modem and wait till it connects to the internet.
- Switch on the new router and wait till the front LED turns solid white.
Set the satellite
For this phase, it’s recommended to keep the Orbi RBR850 router and RBS850 together in the same location. Later on, after the setup is finished, you may relocate the satellite units. Follow these steps to configure the satellite for the Orbi AX6000 setup:
- Switch on the satellite by connecting it to the power supply and wait till the front light turns solid white.
- Use the sync button on the rear to configure it to the router.
- When the front light turns solid blue, follow the next step.
Configure the Orbi
It’s a final step towards the accomplishment of the task at hand. Follow these steps to configure the Orbi AX6000 system and its network:
- Connect any device to the router’s network using a wired or wireless connection.
- Run any of the browsers and navigate to the Orbi router login page.
- Go through the on-screen prompts to finish up the setup.
- Configure the Orbi account and WiFi network settings.
That’s all, your Orbi AX6000 series system is ready for use. Now switch off the satellites and move them to a new location. Use the front LED lights to find the best spot for the best WiFi coverage.
Setup using the app
There’s a quick method to configure the Orbi AX6000 series WiFi system and that is using the Orbi app. Follow these steps to set up the Orbi AX6000 using the app:
- Check for your smartphone’s firmware updates. If a new update is available proceed with it before getting the Orbi app.
- Download the Orbi mobile app from the Google Play Store or Apple App Store.
- Once you’ve installed the app on your phone, run it.
- Grant the required permissions to use the app.
- Follow the on-screen prompts to install and log into the Orbi AX6000 mesh system.
Nice job! You’ve successfully finished the setup using the Orbi app. Now you can move the satellite to the new locations using the LED behavior as the guiding assistance.
Use satellite LED to find the suitable location
Whether you’ve synced the RBS850 satellite to the RBR850 router or moved the satellites to the new location. Use these LED behaviors as your guiding assistant, to help you determine the connection status.
The RBS850 satellite has just started up, and it’s trying to sync to the RBR850 router.
The RBS850 satellite and RBR850 router are in sync and the connection status is good. The satellite may show blue light for a while and then goes off.
The RBS850 satellite and RBR850 router are in sync and the connection status is fair. It’s advised to move the satellite near the router for improved connectivity. The satellite may show blue light for a while and then goes off.
The RBS850 satellite failed to sync to the RBR850 router. Move the satellite close to the router and then try again. The satellite may remain to emit the magenta light, till the connection is fixed.
By following this quick Orbi AX6000 setup manual, you should be able to use its incredible network. The Orbi AX6000 series system is incredible, and worth every single penny once installed properly. If you’ve any questions in mind or need some help, visit our Orbi community page online.
Umar Nisar was born and raised in the busy city of Abbottabad. As a journalist, Umar Nisar has contributed to many online publications including PAK Today and the Huffing Post. In regards to academics, Umar Nisar earned a degree in business from the Abbottabad UST, Havelian. Umar Nisar follows the money and covers all aspects of emerging tech here at The Hear Up.
What Are the Different Types of Water Heaters That Exist Today?
Did you know that water heating accounts for as much as 20% of your household energy use? And that figure grows the longer you stay in that nice hot shower!
Of course, the types of water heaters you choose can also increase (or reduce) your that figure. Once upon a time, people just had a simple hot water tank heated by a fuel of some kind. Today, there’s a surprisingly extensive range of water heaters to choose from, and knowing which is best for your home can be daunting.
If you’re upgrading your current heater or choosing appliances for a new build, diving into the pros and cons of each machine is essential. Below, we explore it all. So read on!
Before you can find the best water heater for your home, you need to understand what a water heater is and does!
Believe it or not, but the is right there in the name: a water heater is an appliance that heats the water in your home, which you then use to wash dishes, clean your body, and wash your clothes–among other activities.
Before the 1890s or so, Americans had to heat their water in an enormous metal bucket atop their wood-burning stoves. Then, they’d carry it over, bucket by bucket, to fill a bathtub in the kitchen.
Today, we’re far luckier–we have water heaters and indoor plumbing to do the job for us.
Now we’ve cleared that up, let’s explore how a residential water heater does what it does. While there are many types of water heaters (more on those later), they all work in similar ways.
First, water is fed into a tank or runs through a pipe. Then, the water is heated slowly (in the case of the tank) or rapidly (in the case of the pipe) until it reaches a pre-determined temperature. Then, when you turn on the hot tap anywhere in your home, the water leaves the tank or runs through the pipes, arriving in the sink or shower hot.
Water heaters mostly used to function on electricity, but now you can run water heaters on gas, solar, and even the hot air from your attic!
If you need a water heater replacement, that’s usually a plumber’s job. But, unfortunately, it’s also typically a significant expense!
Let’s say your current water heater has broken down, and you’re in the market for a new one. If you’re a smart homeowner, you’ll look into all the standard options available today rather than just buying a replica of what you already had.
Almost every homeowner will be familiar with a conventional or tank-style water heater when it comes to homeownership. If you didn’t have one in the house you bought, you almost certainly grew up with one in the house.
This water heater has a tank that fills with water. The tank has two valves:
- A temperature control valve, which releases at 120 F
- A pressure control valve, which releases at 150 PSI
The water in the tank is constantly re-heated to stay at the desired temperature. Then, the hot water is piped all over the house as needed.
Tank water heaters come in various capacities depending on your budget, how it’s powered, and the size of your home (namely, how many places in your house need hot water).
Some homes (especially new homes) have a tankless water heater installed.
As soon as you turn on the hot tap, the coils in the water heater are filled with water. Next, an element heats the coils, which heats the water. It’s the instantaneous result that people love about these water heaters.
In most cases, this type of heater is powered by gas. If they’re run on electricity, they might not be as efficient and may raise your utility bills more than you’d like.
Tankless water heaters are great for homes using a small amount of hot water, like condos or apartments. However, larger homes requiring larger volumes of water might get tepid rather than hot water coming out of the tap.
They also require a certain level of water pressure to function effectively.
If you’re looking for ways to lower your utility bills (and who isn’t these days), consider a hybrid water heater.
This type of heater uses the heat from the ground and the air to heat water. It only uses electricity to transfer the heat to the water, rather than using it to heat the water itself, saving energy.
This type of water heater is typically quite significant because it features a pump on the top of the appliance. This means you need a decent amount of ceiling clearance to install it in your home.
And while it’s relatively inexpensive to run and easy to maintain, it has a higher upfront cost than most other types of water heaters.
A water heater option to emerge in the past decade or so is the solar-power water heater. This option is excellent for those considering adding solar panels to their home and perfect for anyone who already has them!
You need to connect your water tank to solar panels installed on your roof to get hot water. The energy from the sun is transferred to the tank via a closed-loop system made of heat-conductive material. It’s this that heats the water in the tank.
Just remember that while solar is beneficial (and cost-saving) in most parts of America, areas with low sunlight hours might not get the return on investment they were expecting.
Whether you’re happy to stay on the grid or excited to embrace the eco-friendly age, there are types of water heaters to suit.
Environmentalists can choose between solar-powered water heaters and heat-pump or hybrid options. Traditionalists or those in areas with low sunlight hours can stick with a conventional water heater or go for a tankless model. What’s essential is that you do your research on how each option meets your needs and shop around for the best prices.
For more advice on everything household related, browse the other articles on our website.
Khalil ur Rehman is a proud born and raised in Abbottabad. Khalil has worked as a journalist for nearly a decade having contributed to several large publications including the Yahoo News and The Verge. As a journalist for The Hear Up, Khalil covers climate and science news. [email protected]