NEWS

Why Is My Water Heater Not Working?

Published

on

Water Heater

Did you know that the average household in the United States of America uses between 80 and 120 gallons of hot water each day? The water heater is one of the most essential and underrated aspects of a home, and it can create some real inconveniences if you find that your water heater is not working.

It’s safe to wonder why is my water heater not working when your shower turns ice-cold after a long day at work. Hiring someone to handle water heater repair makes sense, but you should also look into the cause of your electric water heater not working.

The good news is that you’re in the perfect place to learn all about what causes a broken water heater. Keep reading this article to learn more today!

Lack of Power

A major reason why your water heater might not be working is a lack of power to produce the heat. The simplest solution is often the correct solution, so it’s good to check whether your electric water heater has access to power. If you’ve discovered that your water heater isn’t working then it’s quite possible that the circuit breaker got tripped or a fuse got blown.

An electric water heater is also likely to have a safety switch on the thermostat. The power cord that plugs your water heater into the wall could also be the reason behind the lack of hot water at your home.

For gas water heaters, it’s best to check out your gas supply to see if it needs to get refilled. The main reason behind a lack of heat from gas heaters is a lack of fuel.

Thermostat Issues

Another reason why your water heater might not be working is the fact that your thermostat is broken. Unfortunately, you’ll need repairs and a hot water heater replacement if something ends up going wrong with your thermostat.

Many water heaters face issues with the heating element rather than the thermostat, but it’s still good to check the thermostat to ensure that it is working the correct way. If your thermostat goes out then you won’t have any access to hot water when you need it.

The thermostat is important because it detects the amount of heat that the water heater is producing. An electric water heater has a high-limit switch in place to keep the water from getting too hot. If the high-limit switch continues going off then it’s a sign that your thermostat is broken.

Rusting Water Heater

Rust is another big reason why your water heater is not working. It’s quite possible that you’ll encounter issues with rust when you have a water heater in your home, especially if it has a tank. An accumulation of rust will eventually cause issues with the temperature of the water and the operation of your water heater.

The more that goes wrong with the machinery the more likely you are to need water heater repair. It’s best to inspect your water heater a few times each year to ensure that it isn’t starting to rust or corrode.

Poorly-Fitted Pipes

The pipes that our water heater uses are also important to check if you notice that your water heater isn’t working like it used to. Many people make the mistake of thinking that they need to hire a water heater replacement murfreesboro repair service if their water isn’t as hot as they’d like. It’s a good idea to take a look at the pipes that are running to and from your water heater to see if they might have leaks.

Valves and pipes that are fitted well are sure to develop leaks if you continue using your water heater. Looking at your pipes will give you a better idea of what the damage is and the steps to take in order to fix it.

Loose Parts

Loose parts could also cause your water heater to start experiencing issues. All it takes is one or two components from the heating element to become loose for the water heater to start experiencing some serious issues.

Loose parts will cause damage and rusting that will necessitate a new water heater if you don’t catch the issue soon enough. Failure to diagnose and fix the issue will result in a water heater that stops working altogether.

Hot and Cold Water Connections

Another issue that you could face with your electric water heater is getting the lines crossed for the cold and hot water. The lines will carry cold water into the water heater in order for it to get heated up. If the lines are crossed then the hot water will mix with more cold water and it will take away from the temperature.

If you suspect that the lines are crossed then it’s best to reach out to a professional for help. Fixing hot and cold water connections is a tricky job and not a great option for a DIY project.

Old Age

Water heaters will also break from old age and usage. At some point, your electric water heater will reach the end of its lifespan and you will have a broken water heater on your hands. You need to prepare for this eventuality raleigh nc, especially if you know that your water heater is getting up there in age.

Many water heaters face a lot of wear and tear over the years. Schedule appointments each year to get proper maintenance for your water heater if you want to get the most from your investment.

Now You Know Why Is My Water Heater Not Working

Having a strong idea of why is my water heater not working is essential if you want to get to the bottom of the reason behind the cold water you’re experiencing during your morning shower. It’s possible that your electric water heater isn’t working due to a tripped circuit or a blown fuse. Rusting is another thing that will require significant hot water heater repair.

Check out the rest of our website if you’re looking for more fun and engaging content like this!

Trending

Exit mobile version