Latest News
Whatman venting filter buy
Whatman venting filters are products for venting air/gases from vessels while keeping contaminants such as bacteria or particles out of the vessel.
Hydrophobic vent filters with PTFE membrane work bi-directionally to keep the product inside the vessel and keep contaminants out when draining or filling vessels like fermentation tanks.
Vent filters with glass fiber media and HEPA retention allow clean air to pass in and out of vessels such as incubators.
Whatman venting filter buy suitable for sterile venting of fermenters, incubators or reaction vessels, preventing the entry or exit of airborne particles.
Filtration medium: glass microfiber; Support: PP.
It retains 99.97% of airborne particles larger than 0.3 µm, which makes it ideal for clean air applications
It allows bidirectional flow
The deep filter design provides a large load capacity
The glass microfiber filter is moderately hydrophobic to offer …
The Whatman rest sterile air filter for syringe ventilation is specifically designed for aerosol separation and ventilation.
It has a PTFE hydrophobic integral filter to retain contaminant particles.
Sterile syringe resist filter is individually packaged blister for critical applications and is non-pyrogenic according to the uspxxlll test.
Sensitivity: 0.25eu / ML. Input / output: female / Luer-Lock cone Luer male.
Disc filter with double lamination reinforced glass filter with a resistant polyester monofilament. It retains 99.97% of all particles = 0.3 μm in the air inside a resistant polypropylene shell.
The characteristic high flow with low pressure drops in the filter media, ensuring a clean air inlet into and out of the vessels.
They are suitable for the removal of air and gas particles, pre-filter for suction or for serving in-line gas filters. Repeatedly autoclave at 121 ° C for 20 minutes (maximum 132 ° C) and available in a variety of final setting configurations.
Manufactured in clean service facilities under ISO quality systems. Repeatedly autoclave at 121 ° C for 20 minutes (132 ° C maximum) to ensure sterility. Each filter allows bidirectional flow. Depth filter design that allows high load capacity. Prevents bacterial, algae or fungal contamination in fermenters or incubators. Ideal also for tissue culture applications. Maximum pressure: 60 psi (4.1 bar) – Capsule. Biosafety: Pass USP Class VI. Filtering area: 16 cm2. Blades: stepped tip for tube 6 – 10 mm 1/4 to 3/8 “Filter diameter: 50 mm. Pack of 10 units. #: 6723-5000.
The Whatman Hepa-Cap 150 in-line venting filter features glass filter media.
High flow rates with low-pressure drop across filter media, ensuring clean air passing in and out of vessels.
Repeatedly autoclavable at 121° C for 20 minutes (132° C max) and available in a variety of end-fitting configurations
. Manufactured in clean room facilities under ISO Quality Systems. Repeatedly autoclavable at 121° C for 20 minutes (132° C max) for assured sterility.
Each filter allows bi-directional flow. Depth filter design allows for high loading capacity. Prevents bacterial, algal or fungal contamination in fermentors or incubators.
Ideal for tissue culture Whatman ventilation filters are products for removing air/gases from containers or tanks, while contaminants such as bacteria or particles are kept away from the container.
PTFE membrane hydrophobic ventilation filters work bi-directionally to keep goods inside the container and prevent contaminants from leaking or filling containers, such as fermentation tanks.
Ventilation filters with fiber-optic support and HEPA retention allow clean air to enter and exit containers such as incubators.
Online devices particularly suitable for sterile ventilation of fermenters, incubators or reaction vessels, preventing the entry or exit of particles in the air. Filtration medium: glass microfiber; Support: PP.
It retains 99.97% of airborne particles larger than 0.3 µm, making it ideal for clean air applications.
Enables bidirectional flow
The design of the deep filter provides a large load capacity.
The glass microfiber filter is moderately hydrophobic to provide …
The Whatman rest sterile air filter for syringe ventilation is specially designed for aerosol separation and ventilation.
It has a built-in hydrophobic PTFE filter to capture contaminating particles.
The sterile syringe retention filter is an individually packaged blister for critical applications and is non-pyrogenic according to the uspxxlll test.
Sensitivity: 0.25eu / ML. Input / output: female / male Luer-Lock Luer cone.
Disc filter with a double-layer reinforced glass filter with a resistant polyester monofilament. It retains 99.97% of all particles = 0.3 μm in the air inside a resistant polypropylene housing.
The high flow rate characteristic at low pressure falls in the middle of the filter, ensuring a clean air intake inside and outside the tanks. They are suitable for removing air and gas particles, pre-filters for suction or for serving in-line gas filters.
Autoclave repeatedly at 121 ° C for 20 minutes (maximum 132 ° C) and available in a variety of final configurations.
Manufactured in clean service facilities under ISO quality systems. Autoclave several times at 121 ° C for 20 minutes (maximum 132 ° C) to ensure sterility. Each filter allows bidirectional flow. Deep filter design that allows high load capacity. Prevents bacterial, algal or fungal contamination in fermenters or incubators. It is also ideal for tissue culture applications. Maximum pressure: 60 psi (4.1 bar) – Capsule. Biosafety: USP Classe VI Pass. Filtration area: 16 cm2. Blades: stepped point for the tube 6 – 10 mm 1/4 to 3/8 “diameter of the filter: 50 mm. Pack of 10 units. #: 6723-5000.
The Whatman Hepa-Cap 150 in-line ventilation filter has a glass filter medium.
High flow rates with low drops in the filter medium, ensuring that clean air enters and leaves the containers. Sterilizable in an autoclave several times at 121 ° C for 20 minutes (132 ° C max.) And available in some type of final configuration. Manufactured in clean rooms with ISO quality systems. It can be autoclaved repeatedly at 121 ° C for 20 minutes (132 ° C max.) To ensure sterility. Each filter allows bidirectional flow. The depth filter design allows for high load capacity.
Prevents bacterial, algal or fungal contamination in fermenters or incubators.
Ideal for tissue culture applications Whatman ventilation filters are products for removing air/gases from containers or tanks, preventing contaminants such as bacteria or particles from entering the container.
Hydrophobic aeration filters with PTFE membrane work bi-directionally to keep goods inside the container and prevent contaminants from flowing or filling containers, such as fermentation tanks.
Ventilation filters with fiber-optic support and HEPA retention allow clean air to enter and exit containers such as incubators.
Online devices particularly suitable for sterile ventilation of fermenters, incubators or reaction vessels, preventing the entry or exit of airborne particles. Filtration medium: glass microfiber; Support: PP.
It retains 99.97% of airborne particles larger than 0.3 µm, making it ideal for clean air applications
Enables bidirectional flow
Deep filter design provides a large load capacity
The Whatman ventilation filters are products for removing air/gases from containers or tanks, while contaminants such as bacteria or particles are kept away from the container.
PTFE membrane hydrophobic ventilation filters work bi-directionally to keep goods inside the container and prevent contaminants from leaking or filling containers, such as fermentation tanks. Ventilation filters with fiber-optic support and HEPA retention allow
Harper Harrison is a reporter for The Hear UP. Harper got an internship at the NPR and worked as a reporter and producer. harper has also worked as a reporter for the Medium. Harper covers health and science for The Hear UP.