Tech

Instructions for Orbi AX6000 series system setup

Published

on

Upgrade your smart home wireless network to a higher level, by taking advantage of the Orbi AX6000 system. With its extraordinary range, ensure that all of your devices stay online all the time at a constant speed.

The Orbi RBR850 AX6000 router provides an enhanced and concurrent internet streaming experience. The RBS850 satellite extends its network so that your devices can have WiFi connectivity even if you’re in the attic or basement.

The Orbi AX6000 WiFi system comes in three sets:

  • RBK852 – One router & one satellite (2-Pack)
  • RBK853 – One router & two satellites (3-Pack)
  • RBK854 – One router & three satellites (4-Pack)

But with this Netgear Orbi AX6000 setup guide, you can set up all these packs in no time. So, let’s get this ball rolling…

Orbi AX6000 setup instructions

There are two methods to set up the Orbi AX6000 series system, which are as follows:

Setup using the web interface

Follow these steps to install the Orbi AX6000 system using the web interface:

Unboxing

First, unbox the pack and fetch every single item out of it. The Orbi AX6000 pack contains the following items:

  • Router
  • Satellite(s)
  • Power adapters
  • Ethernet wire

Set the router

The second phase is to configure the router with the main modem. Follow these steps to achieve this objective:

  1. Switch off the old router and modem.
  2. Disconnect the modem from the old router, by removing the ethernet cable.
  3. Place your RBR850 router in place of your old router and connect it to the modem, using the Ethernet wire.
  4. Switch on the modem and wait till it connects to the internet.
  5. Switch on the new router and wait till the front LED turns solid white.

Set the satellite

For this phase, it’s recommended to keep the Orbi RBR850 router and RBS850 together in the same location. Later on, after the setup is finished, you may relocate the satellite units. Follow these steps to configure the satellite for the Orbi AX6000 setup:

  1. Switch on the satellite by connecting it to the power supply and wait till the front light turns solid white.
  2. Use the sync button on the rear to configure it to the router.
  3. When the front light turns solid blue, follow the next step.

Configure the Orbi

It’s a final step towards the accomplishment of the task at hand. Follow these steps to configure the Orbi AX6000 system and its network:

  1. Connect any device to the router’s network using a wired or wireless connection.
  2. Run any of the browsers and navigate to the Orbi router login page.
  3. Go through the on-screen prompts to finish up the setup.
  4. Configure the Orbi account and WiFi network settings.

That’s all, your Orbi AX6000 series system is ready for use. Now switch off the satellites and move them to a new location. Use the front LED lights to find the best spot for the best WiFi coverage.

Setup using the app

There’s a quick method to configure the Orbi AX6000 series WiFi system and that is using the Orbi app. Follow these steps to set up the Orbi AX6000 using the app:

  1. Check for your smartphone’s firmware updates. If a new update is available proceed with it before getting the Orbi app.
  2. Download the Orbi mobile app from the Google Play Store or Apple App Store.
  3. Once you’ve installed the app on your phone, run it.
  4. Grant the required permissions to use the app.
  5. Follow the on-screen prompts to install and log into the Orbi AX6000 mesh system.

Nice job! You’ve successfully finished the setup using the Orbi app. Now you can move the satellite to the new locations using the LED behavior as the guiding assistance.

Use satellite LED to find the suitable location

Whether you’ve synced the RBS850 satellite to the RBR850 router or moved the satellites to the new location. Use these LED behaviors as your guiding assistant, to help you determine the connection status.

Flashing White

The RBS850 satellite has just started up, and it’s trying to sync to the RBR850 router.

Solid Blue

The RBS850 satellite and RBR850 router are in sync and the connection status is good. The satellite may show blue light for a while and then goes off.

Solid Orange

The RBS850 satellite and RBR850 router are in sync and the connection status is fair. It’s advised to move the satellite near the router for improved connectivity. The satellite may show blue light for a while and then goes off.

Solid Pink

The RBS850 satellite failed to sync to the RBR850 router. Move the satellite close to the router and then try again. The satellite may remain to emit the magenta light, till the connection is fixed.

Wrapping up

By following this quick Orbi AX6000 setup manual, you should be able to use its incredible network. The Orbi AX6000 series system is incredible, and worth every single penny once installed properly. If you’ve any questions in mind or need some help, visit our Orbi community page online.

Trending

Exit mobile version