6 Common Pressure Washing Errors and How to Avoid Them

Common Pressure Washing Errors

Are you wondering how to avoid pressure washer mistakes?

Everyone has made a common mistake from time to time. This doesn’t make you a bad owner or renter of a pressure washer though. But if you don’t learn to be extra careful, these slip-ups can cause major damage.

Fortunately, we’ve outlined the most common pressure-washing errors in this article. These are the key points on how to pick a good pressure washing company.

Keep reading to learn how to avoid improper pressure cleaning at your property.

1. Not Using the Right Pressure Setting

One of the most common pressure washing errors is not using the right pressure setting. Using too high of a pressure can damage surfaces. Meanwhile, using too low of pressure can result in an incomplete cleaning.

Always refer to the manufacturer’s guidelines when using pressure water. Then, adjust the pressure setting according to the surface getting cleaned.

2. Not Using the Appropriate Nozzle

The nozzle you choose will determine the angle and intensity of the water spray. Choosing the wrong pressure washer nozzle can result in damage to the or inefficient cleaning. This can also happen when pressure washing houses.

You can use a narrow-angle nozzle for tough stains. For gentler cleaning, use a wider-angle nozzle instead.

3. Not Prepping the Surface

Prepping the surface before pressure washing is crucial for effective cleaning. This means removing any loose debris, covering any sensitive areas, and wetting down any plants or landscaping. Failure to do so can result in damage or incomplete cleaning.

4. Not Using the Right Cleaning Solution

Using the right cleaning solution can make a big difference in the effectiveness of your pressure washing. Some surfaces need a specific type of cleaner to effectively remove stains and grime.

Always check the manufacturer’s guidelines for the recommended cleaning solution. Then, make sure that it is compatible with your pressure washer.

5. Not Wearing Protective Gear

Pressure washing can be dangerous, especially when using high-pressure settings. This is why it is important to wear protective gear. This includes eye protection, gloves, and sturdy shoes.

This will protect you from potential injuries and keep you safe while operating the pressure washer. Never underestimate the dangers that come with improper use of pressure washing equipment.

6. Not Hiring a Professional

While pressure washing can be a DIY project, it is not always the best option. Some surfaces need specialized equipment and expertise to clean effectively without causing damage.

If you are unsure or uncomfortable with pressure washing, consider hiring a professional to do the job. You won’t have to worry about anything if you go with reliable pressure washing services.

If you try and do things yourself, you might mess up. This, in turn, can result in costly repairs and even replacements.

Avoid Common Pressure Washing Errors

By avoiding these common pressure-washing errors, you can ensure your project succeeds. Take your time and focus on the job at hand. Have patience and use the right tools, techniques, and detergents.

If you need help along the way, don’t be afraid to reach out for advice! Good luck!

Was this article helpful? If so, check out our other posts for more tips that will surely help you out.