Connect with us

Latest News

Aftermarket boat parts from GLM Marine

Published

on

Aftermarket boat parts from GLM Marine

A bit about it :

Have you ever witnessed or faced any breakdown of marine transportation? Ever witnessed it closely? well, in case of any breakdown or destruction of marine boats, repairing or searching for spare parts is no longer a big deal. The aftermarket marine industry is here. Never knew it before? no problem, I’ve got you.

What is the aftermarket?

Aftermarket is the market for spare parts, accessories and components for motor vehicles. Just like BS3XY  for Tesla Aftermarket, We can also say that aftermarket parts are the replacement parts used to replace damaged parts of automobiles, and are not manufactured by the original equipment manufacturers. These corporations are other than those but work for their repairing and re-building. It has already spread widely in the whole world.

GLM marine:

GLM marine is a worldwide corporation for aftermarket marine engine parts. Outboard marine corporation initiated OMC stern during 1962. The corporation is known to deal with the aftermarket marine engine parts. Such corporations are more known by those who have ever purchased any GLM products for their OMCs. And here is this articles for all those who know less about it. GLM marine corporation is located in Canada. All GLM marine afterparts are nicely shown on their website.

How to approach them?

You can simply click on the above link to approach them and their work. All the OMC sterndrive parts are displayed individually along with their detailed drawings. If you can not get enough information and detail from the drawings, you can effortlessly go to youtube for more help. Wayne Coll has more than 65 videos for repairing guide which you can watch to get help. Other than this, you can also find tools and new/old parts which are displayed along with their models and hp.

Spare parts series and repairing details:

The website provides you a complete diagrammatical and theoretical guideline for various marine sterndrives. The diagrams provided along can be used easily to understand the architectures and complicated structures for modifying and repairing.

Stringer OMC stern drive :

Here we talk about a specific boat model and it’s the modification or repairing details which the corporation offers. Also, there were some evolutions with the passage of time which can be understood by seeing the drawings in details. For example Stringer OMC stern drive. It is 400-800 Sterndrive gearcase where units are derived by OMC gear ball. It was for years 1971-1985. It has two common replacements : (i) P/N 11410 stainless steel wear pump shaft with the stripped male spline. (ii) Rebuilt OMC upper gearcase with GLM marine aftermarket parts.

OMC upper gear  and lower gearcase:

OMC Stringer stern drive for upper gearcase was for years 1968-1977 with both press & bolt-on ball gears. OMC lower gear case for years 1982-1986 which had 3-1/4 inch smaller hub. Used parts for both are available for which you can contact the order desk. All pricing details are also provided on OMC remanufactured units. All of its replacements i.e Rebuilt OMC upper gearcase parts with new gears, driveshaft, water pump shaft, housing, bearings, ball ear, seals etc are available.

Other available models:

Other than these defined above, 400-800 electric shift stringer stern drive intermediate housing, cobra with u-joint driven drive shaft (1986-1992) and King Cobra(1988), a cylinder with the small hub (1986-1989) 3 litres, (1987-1990) 4-liter cylinder, v6-v8 cobra large hub rebuild kit, v6-v8 counter-rotating large hub unit. Cobra transom mount, cobra-SX Volvo Penta upper gearcase are also available.

Some evolutions by the corporation:

Till 1985, the versions of 400-800 series were produced inside Canada and USA. After this. Some new versions popped up and new modern parts manufacturing facility was carried out in Lexington, Tennessee. After all this success, the corporation went down in 1998. It was when their rights were purchased by Volvo. Their manufacturing facility was also shifted. Still, OEM parts are interchangeable. Other than this, you can know a lot more by simply going to the website. I would suggest you go and check the amazing stuff they’ve got.

 

Advertisement

Latest News

How does acupuncture work? All you need to know

Published

on

How does acupuncture work? All you need to know

Acupuncture work

Chinese traditional medicine is considered very effective. It consists of many unique methods of treating diseases. Many countries around the world are studying these theories and are beginning to apply them in practice in their clinics. One of these methods is acupuncture. It helps cope with a large list of diseases as well as improve the overall condition of the organism. You can undergo the procedure at a Cross-Up Chiropractic clinic, which employs qualified specialists.

Briefly on the term “acupuncture”

Acupuncture (acupuncture) is an ancient Chinese treatment method. During the procedure, the patient is injected with special needles into the biologically active points. According to Chinese theory, it is believed that the Qi energy is flowing in a person, and only this energy can ensure good health. If it starts to stagnate, various diseases occur. There are over 500 such active points on the human body. They are all connected to each other.

Acupuncture helps:

  • reduce pain;
  • improve the condition of the skin, hair and nails;
  • restore normal hormone synthesis;
  • increase overall immunity;
  • to flush out all the toxins;
  • remove muscle cramps;
  • improve blood circulation.

Acupuncture can really help with a problem with any system of the body.

How does acupuncture work?

A course of acupuncture can only be performed by a specialist who has appropriate training and a license. A person must know when and in what place to insert needles depending on the disease.

The session usually takes place in the comfort of a warm, quiet place on a soft couch. The right amount of needles is injected into a certain part of the body (depending on the problem). The patient usually feels nothing and there is no pain. The session lasts for 15-30 minutes. Then the acupuncturist takes the needles out.

Three to 15 sessions may be needed to improve your health. Everyone feels differently after the treatment. Some feel relaxed and sleepy, others feel a burst of energy.

What can and can’t be done after the procedure?

Immediately after the session, it is recommended that you just lie down for 10-15 minutes and drink water. But these are not all the rules that must be observed. For the duration of the treatment and for two weeks after it, you can’t:

  1. Take any alcoholic beverages. Keep coffee and tea to a minimum. It is better to ask your doctor how much you can drink per day.
  2. Heavy physical activity. Many people feel so energized after the first sessions that they are ready to do something and exercise around the clock. This is not the way to do it. It is better to let the body rest.
  3. Strong drugs like antidepressants, painkillers, and antibiotics are forbidden. Before starting therapy, it is better to ask a specialist about the compatibility of medications and acupuncture.

And the most important point is that for effective results, you need to take a full course of acupuncture. Some patients see an improvement after the second or third time and decide that they have had enough. This is categorically not the way to do it. Only a completed course can benefit the body.

Chinese traditional medicine is considered very effective. It consists of many unique methods of treating diseases. Many countries around the world are studying these theories and are beginning to apply them in practice in their clinics. One of these methods is acupuncture. It helps cope with a large list of diseases as well as improve the overall condition of the organism. You can undergo the procedure at Cross-Up Chiropractic clinic, which employs qualified specialists.

Briefly on the term “acupuncture”

Acupuncture (acupuncture) is an ancient Chinese treatment method. During the procedure, the patient is injected with special needles into the biologically active points. According to Chinese theory, it is believed that the Qi energy is flowing in a person, and only this energy can ensure good health. If it starts to stagnate, various diseases occur. There are over 500 such active points in the human body. They are all connected to each other.

Acupuncture helps:

  • reduce pain;
  • improve the condition of the skin, hair, and nails;
  • restore normal hormone synthesis;
  • increase overall immunity;
  • to flush out all the toxins;
  • remove muscle cramps;
  • improve blood circulation.

Acupuncture can really help with a problem with any system of the body.

How does acupuncture work?

A course of acupuncture can only be performed by a specialist who has appropriate training and a license. A person must know when and in what place to insert needles depending on the disease.

The session usually takes place in the comfort of a warm, quiet place on a soft couch. The right amount of needles is injected into a certain part of the body (depending on the problem). The patient usually feels nothing and there is no pain. The session lasts for 15-30 minutes. Then the acupuncturist takes the needles out.

Three to 15 sessions may be needed to improve your health. Everyone feels differently after the treatment. Some feel relaxed and sleepy, others feel a burst of energy.

What can and can’t be done after the procedure?

Immediately after the session, it is recommended that you just lie down for 10-15 minutes and drink water. But these are not all the rules that must be observed. For the duration of the treatment and for two weeks after it, you can’t:

  1. Take any alcoholic beverages. Keep coffee and tea to a minimum. It is better to ask your doctor how much you can drink per day.
  2. Heavy physical activity. Many people feel so energized after the first sessions that they are ready to do something and exercise around the clock. This is not the way to do it. It is better to let the body rest.
  3. Strong drugs like antidepressants, painkillers, antibiotics are forbidden. Before starting therapy, it is better to ask a specialist about the compatibility of medications and acupuncture.

And the most important point is that for effective results, you need to take a full course of acupuncture. Some patients see an improvement after the second or third time and decide that they have had enough. This is categorically not the way to do it. Only a completed course can benefit the body.

Continue Reading

Trending

error: Content is protected !!